Model MRSW-SS1-U Shown in Roman Bronze Matte (39/60060)

The MaxiForce Wrench Operated Removable Bollards are placed near stadiums for quick emergency access, the hydrant wrench allows the fire and rescue personnel to operate the bollards with the hydrant wrench that they carry with them. These bollards can also be removed for maintenance crews when needed.

Model MRRW-RS1-R Shown in High Reflective White (49/10410)

MaxiForce Wrench Operated Removable Bollards are set on a campus street that has been turned into a pedestrian only pathway. These bollards are powder coated High Reflective white with reflective tape which makes them highly visible to motorist.

Model MRSP-SS2-U Shown in Bengal Light Grey (49/77777)

MaxiForce Padlock Operated Removable Bollards give maintenance crews the upper hand when accessing an otherwise blocked off area. By simply removing the padlock, these bollards can be lifted out of place and laid to the side for access.  The entry can be closed again by placing the bollard back into its upright position in the base.

Model MRRW-RS2-U Shown in Bengal Black (49/88888)

MaxiForce Wrench Operated Removable Bollards have been placed on each side of the crosswalk at an intersection of a school sidewalk and a street. These bollards discourage motorist from driving on the sidewalks but give maintenance workers access when required. If a life safety issue occurs, the wrench operated units also allow first responders easy access without the need of a key.

Model MRRW-RS1-R Shown in Harford Green (38/50110)

This bollard is powder coated Hartford Green which matches the college campus accessories, however reflective tape has been applied for night time visibility. Notice the 5-sided hydrant nut on this bollard. This hydrant nut is used in nearly all jurisdictions in the United States. MaxiForce also offers four other hydrant nut types for areas that stray from the standard 1-3/8" nut. All first responders typically carry a fire hydrant wrench in their vehicles as standard equipment allowing access to this area without first tracking down a key from the end user.

Model MRRW-RS1-U Shown in Haze Grey (49/71800)

MaxiForce Wrench Operated Removable Bollards are used near bus stops to ensure safety from motor vehicles. These bollards are located beside a bus stop between a busy road and a parking lot. The bollards deter drivers from trying to access the parking lot through this area which offers protection to pedestrians waiting for buses. This is also a great choice here as snow removal dictates the bollards be temporarily removed for plows and shovelers to clear the area.

Model MRSW-SS2-U Shown in Haze Grey (49/71800)

MaxiForce Wrench Operated Removable Bollards allow maintenance crews to operate and remove the bollards as required. These bollards are used to block unauthorized access to this maintenance only road.

Model MRRW-RS2-U Shown in Bengal Black (49/88888)

MaxiForce Wrench Operated Removable Bollards allow the children at this school to walk freely on the sidewalks while blocking unwanted vehicular access. These bollards can be easily removed by maintenance or emergency crews when access is required.

Model MRRW-RS1-R Shown in Harford Green (38/50110)

MaxiForce Removable Bollards deter traffic in unwanted areas. This street is sometimes closed off to traffic during high traffic pedestrian hours. Striped reflective tape has been applied for high visibility.

Model MRSW-SS2-U Shown in Roman Bronze Matte (39/60060)

MaxiForce Wrench Operated Removable Bollards are placed on sidewalks near dorms to discourage traffic on pedestrian walkways. These bollards can be removed for maintenance or during emergency situations by turning the hydrant nut and releasing the bollard from the base unit.